Varmatoimiset tiivisteet hydrauliikkaan ja pneumatiikkaan

Varmatoimiset tiivisteet hydrauliikkaan ja pneumatiikkaan

Suunnittelemme ja toimitamme hydrauliikkatiivisteitä eri teollisuuden aloille.

Kaikki tiivisteet suunnitellaan ja valmistetaan laitekohtaisesti toimimaan maksimaalisen huoltovälin ja turhien seisokkien ehkäisemiseksi.

Käytettävät materiaalit ja korkealuokkainen valmistusteknologia yhdistettynä tietämykseemme takaavat pitkäaikaisen ja tehokkaan ratkaisun.

Hydrauliikka ja Pneumatiikka

Aflas Extreme TFE

Erittäin hyvä lämmönkestävyys ja kemiallinen yhteensopivuus.

Aflas Extreme perustuu Asahi Glass Companyn Aflas™ tuotteeseen joka on ainutlaatuinen fluorattu kumi joka yhdistää erinomaisen lujuuden äärimmäiseen kemialliseen lämpötilan ja sähkönkestävyyteen Se on valmistettu lisäämällä PTFE rakenteeseen mikä tekee siitä vahvemman kuin tavallinen Aflas Nämä ominaisuudet...

Kategoria :

Korkeamman väliaineenkestävyyden vuoksi sitä suositellaan seuraavissa tilanteissa:

  • 100% metanoli
  • Höyry jopa 160 C (erikoistyypit 200 C)
  • Emäkset ja amiinit
  • Aggressiiviselle öljyt, voiteluaineille ja jäähdytysnesteille
  • Hyvä happo-emäs- ja höyryvastusta
  • Käytetään pääasiassa kemian- ja offshore-teollisuudessa
  • Erittäin kestävä HFC:lle, HFD:lle, amiineille sekä jarrunesteille D0T3 ja D0T
  • 250ºC

Epdm

Good resistance to hot water, steam and vegetable oils.
EPDM has good resistance to hot water steam and vegetable oils The material has outstanding resistance to weathering and is compatible to other numerous units EPDM has very good mechanical properties and is recommended for using in steam...
Kategoria :
  • Good at low temperatures
  • Good resistance to hot water, steam and vegetable oils
  • Outstanding resistance to weathering
  • Numerous other compatible units
  • Low compression set
  • 130ºC
  • 160 bar

Epdm peroxide

Compatibility with fireproof hydraulic fluids, ketons and alkalis.
EPDM Peroxide has very good low temperature properties high resistance to ozone aging and weathering as well as polar solvents alcohols ketones esters and HFC liquids and Glycol based brake fluids However it is not resistant to petroleum products fats...
Kategoria :
  • Good at low temperatures
  • Good resistance to hot water, steam and vegetable oils
  • Outstanding resistance to weathering
  • Numerous other compatible units
  • Low compression set
  • 130ºC
  • 160 bar

Grin

Universally applicable sealing material which can be characterized by its wide service temperature range.
The material has very good values for tensile strength elongation at break and tear strength GRIN is a food grade polymer It also has a very low compression set Its excellent wear resistance high elasticity high dynamic resistance as well...
Kategoria :
  • Outstanding toughness & abrasion for high pressure applications
  • Mineral oil compatibility is good
  • Good resistance to ozone attack & weathering
  • 115ºC
  • 400 bar

HNBR

Suitable for applications involving aliphatic hydrocarbons such as fuel. propane, butane, mineral oils and greases.
HNBR has improved abrasion resistance while still retains high elasticity Its service temperature range is from 20°C to 150°C It also works for a short time in hot air up to 180°C It is resistant to non polar and low...
Kategoria :
  • Hydrogenated acrylonitrile butadiene rubber
  • Suitable for applications involving aliphatic hydrocarbons such as fuel. propane, butane, mineral oils and greases
  • May be used in diluted acids, alkalis and salt solutions
  • 150ºC
  • 160 bar

HPU

Excellent Food Grade Material.
HPU is a MDI polyurethane It has good values for tensile strength elongation at break and tear strength It also has a very low compression set HPU is Hydrolysis resistant UV resistant and has good mineral oil compatibility as well...
Kategoria :
  • Outstanding toughness & abrasion for high pressure applications
  • Mineral oil compatibility is good
  • Good resistance to ozone attack & weathering
  • 115ºC
  • 400 bar

Monyt

Outstanding toughness & abrasion for high pressure applications.
MONYT has proved to be an excellent choice for bearing and bushing application Its high compression modulus owing to the glass fiber reinforcement and excellent dimensional stability is very important in it s functioning MONYT polymer is Hydrolysis resistant UV...
Kategoria :
  • Outstanding toughness & abrasion for high pressure applications
  • Mineral oil compatibility is good
  • Good resistance to ozone attack & weathering
  • Low compression set, excellent hot water resistance, resistance in HFA/HFB and HFC hydraulic fluids and in biologically reducible hydraulic fluids
  • Permanently triple lubricated with Molybdenum Disulfide+ Fat+ Wax
  • 130ºC
  • 1000 bar

Motuf

High strength plastic suitable for bearings, bushing and back-up ring applications.
Motuf is a high strength engineering plastic suitable for bearings bushing and back up ring applications This flexible bearing material provides increased thermal stability elongation and abrasion resistance It also displays good low temperature impact resistance high dimensional stability favorable...
Kategoria :
  • High performance thermoset polyurethane
  • Low compression set
  • Excellent hot water resistance, good mineral oil compatibility
  • Resistance in HFA, HFB hydraulic fluids and using biologically reducible hydraulic fluids
  • Outstanding toughness & abrasion for high pressure applications
  • Good resistance to ozone attack & weathering
  • Low compression set, excellent hot water resistance, resistance in HFA/HFB and HFC hydraulic fluids
  • 130ºC
  • 400 bar

Namo

Low compression set, Excellent hot water resistance.
NAMO Natural Poly is a hydrolysis resistant material for a temperature range from 50°C to 120°C Especially suitable for piston rod seals with soft elastomer energizers slip rings or wipers using for strong dirt NAMO is a food grade material...
Kategoria :
  • Low compressions set
  • Excellent hot water resistant
  • Resistance in HFA, HFB hydraulic fluids and using biologically reducible hydraulic fluids
  • FDA approved
  • 120ºC

Napo

Outstanding toughness & abrasion for high pressure applications.
NAPO is universally applicable sealing material which can be characterized by its wide service temperature range NAPO is a food grade material which makes it great for pressure seals which are in contact with food The material has good values...
Kategoria :
  • Outstanding toughness & abrasion for high pressure applications
  • Mineral oil compatibility is good
  • Good resistance to ozone attack & weathering
  • FDA approved
  • 110ºC

Neoprene

High performance nylon, ammonia resistant.
Neoprene rubber is a highly resistant material and is used for a variety of outdoor and marine applications OZ Neoprene is produced by the polymerization of chloroprene Neoprene rubber resists degradation more than natural or synthetic rubber...
Kategoria :
  • High performance urethane
  • Nylon
  • Resistance in ammonia
  • 100ºC

ORSP

High performance material with triple lubrication.
Hydrolysis resistant UV resistant and has superior mineral oil compatibility as well as great resistance to ozone attack and weathering This high performance material is triple lubricated It is able to maximize its elasticity and is very effective in fast...
Kategoria :
  • Outstanding toughness & abrasion for high pressure applications
  • Mineral oil compatibility is good
  • Good resistance to ozone attack & weathering
  • High performance polyurethane
  • 150ºC
  • 1000 bar

Pro flex

Outstanding toughness & abrasion for high pressure applications.
Pro Flex is a polyurethane rubber It has very good values for flexibility tensile strength elonga­tion at break and tear strength It also has a low compression set Its excellent wear resistance high elasticity high dynamic resistance as well as...
Kategoria :
  • Outstanding toughness & abrasion for high pressure applications
  • Mineral oil compatibility is good
  • Good resistance to ozone attack & weathering
  • High performance polyurethane
  • FDA approved
  • 120ºC

PTFE

Chemical resistance to all commercial fluids & chemicals.
100 pure PTFE white is resistant to almost all chemicals apart from fluorine molten alkali metals and halogens It also has very good sliding properties Due to its low elasticity PTFE virgin is not suitable with high mechanical loads PTFE...
Kategoria :
  • Good mechanical resistance if reinforced with glass, carbon or bronze
  • Bearing Pressure: 2N/mm
  • Excellent chemical resistance to almost all commercial fluids & chemicals
  • Highly stable electrical insulating properties
  • Has weather resistant properties
  • Excellent resistance to extreme heat & cold
  • Self-lubricating properties
  • Grades: virgin, carbon filled, glass filled, bronze or PPS filled
  • 260ºC

Silicone

Excellent food grade material.
SILICONE has a a great temperature range and has high resistance to low and high temperatures It is metal detectable and concerning the chemical composition silicone is often used in the food industry One of the disadvantage of silicone is...
Kategoria :
  • Excellent food grade material
  • Metal detectable
  • Heat resistance
  • Great temperature range
  • 200ºC

TFG

Ideal for high load bearing applications.
TFG 25 Glass contains of 25 clean milled fibres and 75 PTFE virgin This material offers a higher stiffness and better wear properties than PTFE virgin It is not useable for soft metal counterparts and has a limited usage in...
Kategoria :
  • Improved creep resistance over all temperature ranges
  • Bearing Pressure: 3N/mm
  • Improved wear behavior
  • Exceptional resistance to water
  • 25% glass must be avoided with the use of strong alkalis and hydraulic acid
  • 260ºC

Haluan lisätietoa

Kirjoita nimesi ja sähköpostiosoitteesi niin l